Bolton Arch Fireplace Insert

The Bolton shown is Pine Danesbury Mantel.

This product is a cast facia only and will require a fireback to be installed. This can be either a standard 16" solid fireback or the optional cast iron back.

There is a choice of fire to suit solid fuel, gas or electric:

The Solid Fuel kit includes a grate, ashpan and tool to remove the ashpan and is essential for burning coal. This fire will require a 9" Class 1 chimney for solid fuel appliances.

The Gas Fire is a coal effect 'tray' fire, which sits inside the arch. The input is below 7kW, therefore a vent is not required in the room. The output is approximately 1.5kW. This fire requires at least 7" Class 1 chimney for gas appliances.

The Electric Fire comes supplied with a fitted plug and has a glowing coal bed effect with real loose coals. The 'Heat & Effect' fire will produce up to 2kW of heat.

Note: The chamber size dimensions shown are in addition to the relevant rebate size quoted. If buying with a mantel, please check the mantel selected has the appropriate rebate. The chamber sizes given are for cast iron backs. These dimensions are designed as a guide only, no allowance has been made for lintels or back filling which ia an essential part of fireplace installation.
Due to the casting process all measurements are approximate and may vary slightly.
Polished Cast Iron products are not recommended for solid fuel fires as some discolouration may occur.