Following huge demand for multifuel and wood burning stoves our regular stocks are now very low. Most manufacturers have long production times on new orders resulting in a delay in delivery. Because of this, orders for stoves not in stock can not be guaranteed delivery before Christmas. If you are interested in a particular model, please call our sales office on 01745 582300 to enquire about availability. Stock will be allocated on a first come first served basis. Click here for approximate delivery times for none stock items.
Our prices are now even lower, with the introduction of the new 15% VAT rate on all products.
Dunsley Highlander 3 Multi-fuel Stove
| Designed to give you cleaner burn and superb efficiency, its appearance and superb air wash gives it an appearance to be desired. |
FREE PLAIN FLUE PIPE WITH THIS STOVE Add the flue pipe you need to your basket | ||||||||||
|  | ||||||||||
| |||||||||||
| Product Specification | |||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||
| Product Description | |||||||||||||||||||||||||||||||||||||||
As with the Dunsley Highlander 7 and 5 the Dunsley Highlander 3 multi-fuel stove has been designed to give you cleaner burn and superb efficiency. Its slim appearance and superb air wash gives it an appearance to be desired. The air wash and primary air controls are designed to be precisely controlled, to allow maximum efficiency to be obtained and control outputs to your requirements. The Dunsley Highlander 3 is also fitted as standard with a superb shaker grate. This enables logs or any other solid fuel to be burnt at maximum efficiency and is very easy and clean to operate. The Dunsley Highlander 3 stove is available with matching canopy, on request. This can be removed or replaced at any time. The Dunsley Highlander 3 has interchangable top or rear flue outlets fitted as standard, to take 125mm flue pipe. The Dunsley Highlander 3 has been designed with one door to open for re-fuelling and ash removal, therefore no safety precautions are necessary to prevent overfiring of fuel when removing ash from below the grate. The Highlander-3 will take logs up to 200mm (8") long. The super air wash system has been designed tp keep the glass clean to give a full view of the superb flame pattern, created as the flames rise to meet the incoming air, thus causing secondary combustion to take place. A steel boiler or stainless steel boiler is also available. This takes the place of the rear firebrick and can be installed by Dunsley if ordered with the stove, or can be fitted at a later date if required. The Dunsley Highlander is a traditional wood burning and solid fuel stove manufactured from the very best material, finished in a heat resistance metallic black stove enamel paint and fitted with either black or brass handles at no extra cost. The firebox is lined with high temperature firebrick, the bricks have been pressure cast for longer life. The super air wash system helps to keep the glass clean to view the warm dancing flames. The highly efficient Dunsley Highlander stove with its clean looks and full view window will make a focal point of any room. If you intend to fit the canopy onto the stove add 110mm to the height. NB: Flue pipe is not provided by the manufacturer with most stoves. Exceptions to this are balanced flue gas stoves, which include a standard pipe and termination and flueless gas stoves which do not require flue pipe. You can order flue pipe using the link marked 'Stove Flue Pipe' in the menu on the left of the screen. | |||||||||||||||||||||||||||||||||||||||
Dunsley Highlander 3 Multi-fuel Stove - Speak to the experts at firesonline.co.uk
© Copyright Fires Online 2000-08
